NIHON MESH KOGYO UAE FZC

Square Type DEMISTER

Mist eliminators/ demisters are fabricated from knitted materials with interlocking asymmetrical loops of metal or plastic with typical diameters being 0.1 – 0.3mm.

learn more

DEMISTER

Mist eliminators/ demisters are fabricated from knitted materials with interlocking asymmetrical loops of metal or plastic with typical diameters being 0.1 – 0.3mm.

learn more

INTERNAL

These products are used together with Mesh Demister in countries throughout the world for manufacturing processes in oil refining,...

learn more

WEDGE WIRE SCREEN

As a specialized maker of special-purpose industrial metal mesh, our fine-aperture mesh woven based on our accumutalted experience and technology is highly praised in a variety of industries.

learn more
MESH DEMISTER

How a Demister Works:

Mist eliminators/ demisters are fabricated from knitted materials with interlocking asymmetrical loops of metal or plastic with typical diameters being 0.1 – 0.3mm. By careful choice of wire diameter, NIHON MESH has produced demisters with extremely high free volumes (typically 98 – 99%) along with very high removal efficiency and low pressure drop.

Along with wire diameter and mesh density, another important parameter in design and operation of demisters is the vapor velocity. This can be controlled by careful selection of the eliminator area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascal.

Materials commonly used:

Stainless Steel     : Grades 302, 304, 316, 316L, 321, 309, 310S
Super Alloys        : Inconel 601, Incoloy DS, Hastalloy, Carpenter 20
Fibrous Filament : ‘E’ Glass, ‘S’ Glass, ‘A’ Glass
Others            : Aluminium, Monel, Copper, and Brass, Mild Steel (plain and galvanised), Polypropylene, Polyethylene

Why Demisters from NIHON MESH KOGYO?

Elimination of NIHON MESH demisters are dependent on droplet sizes:
5 – 9 micron 99%
> 10 micron 99.5%
Most of the weight of entrained mist tends to be associated with the larger mist particles (larger than 5 – 10μm) thus providing greater that 99.99% weight removal.

All of NM demisters are custom made to your specification. The units can be breakup into smaller parts for easy installation into tight spaces. Individual drawings are also provided and documented for each of the demisters units upon confirmation.

Our units are satisfied among our customers for good durability. We have also a good track record for having negligible annual production errors for the past few years.

While there are many manufacturers of wire mesh products in Asia, the manufacturing of a demister entails numerous calculations for even the most simple application. Nihon Mesh Kogyo UAE FZC is one of the few providers in the Asian and Middle East market whom is able to provide proper performance data for all units that we manufacture.

Mesh Demister Materials

Stainless Steel SUS-304, SUS-316, SUS-316L, Carpenter-20, Monel, Hastelloy C, Titanium, Polypropylene and Teflon.
The above materials are selected and used according to the application and the client request.

Style Density (Kg/m3) Free Volume (%) Surface Area (m2/m3) Other Company
H 80 99.0 158 931
N 144 98.2 280 431
SN 128 98.4 460 326
SL 193 97.5 375 421
N-2 Equal efficiency with 20% higher design velocity, compared to our Traditional styles. G
SL-2 709

Mist eliminators are separation devices, used throughout all kinds of process industries, to remove liquid droplets from gas and/or vapor streams. The most commonly used type is the knitted wire mesh mist eliminator, as it has no moving parts and requires a little (if any) or no maintenance. Our wire mesh demisters are available in a wide range of styles, sizes and shapes.

CONTACT INFO
Nihonmesh Kogyo UAE FZC
Cell : +971 50 938 2811
Landline : +971 7 266 8373
Fax : +971 7 266 8375
email : nmkuf@eim.ae
           sales@nihonmeshuae.com